APPLIV SWING GATE ACCESS CONTROL
The FB-E-2216 Flap Barrier is designed for controlled pedestrian entry and exit at corporate offices, commercial buildings, business centers and managed access points. Featuring a 550 mm passage width, six pairs of infrared sensors and a specified pass rate of 35–50 persons per minute, it supports organized pedestrian movement through designated access lanes.
Built using SUS304 stainless steel with a 1.2 mm top and 0.9 mm body, the FB-E-2216 features acrylic gate arms with RGB lighting, brushless Flap Barrier movement and a brushless control system. Its dimensions are 1400 × 280 × 980 mm, with Dry Contact and RS485 communication. The catalogue specifies IP4X protection and installation for indoor environments or outdoor locations with a canopy.
PRODUCT FEATURES
Explore the key features of the FB-E-2216 Flap Barrier, designed for controlled pedestrian entry and exit at offices, commercial buildings and managed access points. With brushless swing gate movement, acrylic arms with RGB lighting, six pairs of infrared sensors and SUS304 stainless steel construction, the FB-E-2216 provides a practical option for planned pedestrian access installations.
The FB-E-2216 is manufactured using SUS304 stainless steel, with a specified top thickness of 1.2 mm and body thickness of 0.9 mm. Its catalogue-listed dimensions are 1400 × 280 × 980 mm, helping with barrier layout and installation planning.
The FB-E-2216 features acrylic gate arms with RGB lighting and an RGB indicator light. This configuration provides a visually distinctive pedestrian barrier design for managed entry and exit installations.
The product uses brushless Flap Barrier movement with a brushless control system. Its catalogue also specifies a Brushless DC 30K 40 W drive unit, forming part of the gate's movement and control arrangement.
The FB-E-2216 includes six pairs of infrared sensors, according to the supplied catalogue. These sensors support pedestrian detection as part of the Flap Barrier controlled passage operation.
With a specified passage width of 550 mm and a catalogue-listed pass rate of 35–50 persons per minute, the FB-E-2216 supports planned pedestrian throughput at controlled access points. Actual throughput may vary with access procedures and installation conditions.
The FB-E-2216 supports Dry Contact and RS485 communication interfaces and uses a brushless control system. The catalogue specifies IP4X protection and indoor installation, with outdoor installation requiring a canopy.
PRODUCT TECHNICAL DETAILS
Explore the technical specifications of the FB-E-2216 Flap Barrier, including its SUS304 stainless steel construction, acrylic gate arms with RGB lighting, brushless movement, infrared sensors, passage width, pedestrian pass rate, power requirements, communication interfaces and installation environment. All values below are based on the supplied product catalogue.
| Specification | Details |
|---|---|
| Product Model | FB-E-2216 |
| Dimensions (L × W × H) | 1400 × 280 × 980 mm |
| Passage Width | 550 mm |
| Material | SUS304 Stainless Steel |
| Top Thickness | 1.2 mm |
| Body Thickness | 0.9 mm |
| Bar Material | Acrylic Arm + RGB Light |
| Movement | Brushless Movement of Swing Gate |
| Infrared Sensors | 6 Pairs |
| Indicator Light | RGB Light |
| Power | 50 W |
| Drive Unit | Brushless DC 30K 40 W |
| Power Supply | 24 V, 150 W |
| Control Unit | Brushless Control System |
| Communication Interface | Dry Contact & RS485 |
| Pass Rate | 35–50 Persons/Minute |
| Operating Temperature | −20°C to +70°C |
| Humidity | ≤90%, No Condensation |
| IP Rating | IP4X |
| Installation Environment | Indoor and Outdoor (Outdoor with Canopy) |
Note: Technical specifications are based on the supplied FB-E-2216 product catalogue. Outdoor installation requires a canopy, as specified in the catalogue. Confirm the installation layout, electrical connections, controller compatibility and required configuration before ordering.
FREQUENTLY ASKED QUESTIONS
Find answers to common questions about the FB-E-2216 Flap Barrier, including its dimensions, SUS304 stainless steel body, acrylic arms with RGB lighting, brushless movement, infrared sensors, passage width, pass rate, power requirements, communication interfaces and installation environment.
The FB-E-2216 Flap Barrier is a pedestrian access control barrier featuring brushless swing gate movement, acrylic arms with RGB lighting and six pairs of infrared sensors. It is designed for controlled pedestrian entry and exit at offices, commercial buildings, business premises and other managed access points.
The FB-E-2216 measures 1400 × 280 × 980 mm (L × W × H) and has a specified passage width of 550 mm. These dimensions help with planning the pedestrian lane, installation space and barrier layout.
The FB-E-2216 Flap Barrier uses SUS304 stainless steel. According to the product catalogue, the top material thickness is 1.2 mm and the body material thickness is 0.9 mm. Its gate arms are made from acrylic material with RGB lighting.
Yes. The FB-E-2216 features acrylic gate arms with RGB lighting, an RGB indicator light and six pairs of infrared sensors. These are listed in the supplied product catalogue as part of its gate configuration.
The FB-E-2216 has a catalogue-specified pass rate of 35–50 persons per minute. It uses brushless Flap Barrier movement with a brushless control system and a Brushless DC 30K 40 W drive unit. Actual pedestrian throughput may vary depending on site conditions and access procedures.
The FB-E-2216 catalogue specifies 50 W power, a Brushless DC 30K 40 W drive unit and a 24 V, 150 W power supply. It uses a brushless control system and supports Dry Contact and RS485 communication interfaces.
According to the product catalogue, the FB-E-2216 is suitable for indoor installation and outdoor installation with a canopy. It has an IP4X protection rating, an operating temperature range of −20°C to +70°C and a specified humidity limit of 90% or less without condensation. Outdoor installations should follow the catalogue's canopy requirement.
To enquire about the FB-E-2216 Flap Barrier price, availability, technical specifications and quotation, please contact Appliv or email sales@appliv.in . Share your installation location, required quantity and project details for a product enquiry.
APPLIV FLAP BARRIER ACCESS CONTROL
Interested in the FB-E-2216 Flap Barrier with RGB lighting? Contact Appliv for product details, availability, technical specifications and quotation. Our team can help you review the 550 mm passage width, SUS304 stainless steel construction, acrylic gate arms, brushless movement, infrared sensor configuration and installation requirements for your pedestrian access control project.
You can also email us at sales@appliv.in for product enquiries.