Appliv FB-E-1000 Flap Barrier Gate

APPLIV FLAP BARRIER GATE

FB-E-1000 Flap Barrier Gate

The FB-E-1000 Flap Barrier Gate is designed for controlled pedestrian access at offices, corporate buildings, commercial premises and other managed entry points. It features a 550 mm passage width, three pairs of sensors and a catalogue-specified pass rate of 35 persons per minute, supporting organized pedestrian movement through designated access lanes.

Manufactured using 2.0 mm SUS304 stainless steel, the FB-E-1000 measures 1200 × 280 × 980 mm and uses a DC brushed motor. The catalogue specifies a 100–240 V input range, 50 W power, IP56 protection, an operating temperature range of −20°C to +70°C and an MCBF of 5 million. These specifications make it suitable for evaluation in planned pedestrian access control installations.

550 mm Passage Width
35 Persons/Minute Pass Rate
SUS304 Stainless Steel
3 Pairs of Sensors

PRODUCT FEATURES

Key Features of FB-E-1000 Flap Barrier Gate

Explore the key features of the FB-E-1000 Flap Barrier Gate, designed for controlled pedestrian access at corporate offices, commercial buildings and managed entry points. Featuring SUS304 stainless steel construction, three pairs of sensors, a DC brushed motor and a 550 mm passage width, the FB-E-1000 provides a structured solution for pedestrian access management.

SUS304 Stainless Steel Construction

The FB-E-1000 is manufactured using SUS304 stainless steel with a specified material thickness of 2.0 mm. Its stainless steel construction provides a defined barrier housing for planned pedestrian access installations.

Three Pairs of Sensors

The product catalogue specifies three pairs of sensors for the FB-E-1000 Flap Barrier Gate. These sensors form part of the barrier's pedestrian detection system and support managed passage operation.

550 mm Passage Width

With a catalogue-specified passage width of 550 mm, the FB-E-1000 provides a designated pedestrian access lane. Its overall dimensions are 1200 × 280 × 980 mm, helping installers plan the required space and barrier arrangement.

35 Persons/Minute Pass Rate

The FB-E-1000 has a catalogue-specified pass rate of 35 persons per minute, supporting planned pedestrian throughput at controlled entry and exit points. Actual flow may vary with site conditions and access procedures.

DC Brushed Motor & 50 W Power

The FB-E-1000 uses a DC brushed motor. Its listed electrical specifications include 50 W power, 220 AC power supply and 100–240 V input voltage, allowing the electrical requirements to be reviewed during installation planning.

IP56 Protection & 5 Million MCBF

The product catalogue lists an IP56 protection rating and an MCBF of 5 million. It also specifies an operating environment of −20°C to +70°C. These ratings help evaluate the FB-E-1000 for different pedestrian access installation requirements.

PRODUCT TECHNICAL DETAILS

FB-E-1000 Flap Barrier Gate Technical Specifications

Explore the technical specifications of the FB-E-1000 Flap Barrier Gate, including its SUS304 stainless steel construction, dimensions, three pairs of sensors, passage width, pedestrian pass rate, DC brushed motor, power requirements, operating temperature, IP rating and MCBF. The specifications below are based on the supplied FB-E-1000 / FB-E-1200 product catalogue.

Specification Details
Product Model FB-E-1000
Material SUS304 Stainless Steel, 2.0 mm
Dimensions (L × W × H) 1200 × 280 × 980 mm
Sensor Pairs 3 Pairs
Passage Width 550 mm
Pass Rate 35 Persons/Minute
Motor Type DC Brushed Motor
Input Voltage 100–240 V
Operating Temperature −20°C to +70°C
Power Supply 220 AC
Power 50 W
IP Rating IP56
MCBF 5 Million

Note: Technical specifications are based on the supplied FB-E-1000 / FB-E-1200 product catalogue. The listed pass rate represents the catalogue value; actual pedestrian throughput can vary according to installation conditions and access procedures. Confirm the required electrical connections, installation dimensions and product configuration before ordering.

FREQUENTLY ASKED QUESTIONS

Frequently Asked Questions About FB-E-1000

Find answers to common questions about the FB-E-1000 Flap Barrier Gate, including its stainless steel construction, dimensions, passage width, sensor pairs, pedestrian pass rate, motor, power requirements, protection rating and product enquiries.

What is the FB-E-1000 Flap Barrier Gate?

The FB-E-1000 Flap Barrier Gate is a pedestrian access control barrier designed for managed entry and exit points. It features SUS304 stainless steel construction, three pairs of sensors, a DC brushed motor and a 550 mm passage width. It can be considered for offices, corporate buildings, commercial premises and other controlled pedestrian access locations.

What are the dimensions and material of the FB-E-1000?

According to the product catalogue, the FB-E-1000 measures 1200 × 280 × 980 mm and is manufactured using SUS304 stainless steel with a material thickness of 2.0 mm. These specifications help with installation space planning and barrier layout selection.

What is the passage width and pass rate of the FB-E-1000?

The FB-E-1000 Flap Barrier Gate has a specified passage width of 550 mm and a catalogue-listed pass rate of 35 persons per minute. Actual pedestrian throughput may vary depending on site conditions, user movement and access procedures.

How many sensor pairs are included in the FB-E-1000?

The FB-E-1000 catalogue specifies three pairs of sensors. These form part of the flap barrier's pedestrian detection arrangement for managed passage operation.

What type of motor is used in the FB-E-1000 Flap Barrier Gate?

The FB-E-1000 uses a DC brushed motor, as specified in the supplied product catalogue. The listed power rating is 50 W.

What are the power supply and input voltage requirements of the FB-E-1000?

The FB-E-1000 catalogue lists a power supply of 220 AC, an input voltage range of 100–240 V and a power rating of 50 W. Electrical installation should follow the applicable product documentation and site requirements.

What is the IP rating, operating temperature and MCBF of the FB-E-1000?

The FB-E-1000 has a catalogue-listed IP56 protection rating, an operating temperature range of −20°C to +70°C and an MCBF rating of 5 million. These technical specifications help evaluate the product for different access control installation environments.

How can I get the FB-E-1000 Flap Barrier Gate price and quotation?

To enquire about the FB-E-1000 Flap Barrier Gate price, availability, product specifications and quotation, please contact Appliv or email sales@appliv.in . You can share your required quantity, installation location and project details for a product enquiry.

APPLIV FLAP BARRIER GATE

Get in Touch for Product Enquiry

Interested in the FB-E-1000 Flap Barrier Gate? Contact Appliv for product details, availability, technical specifications and quotation. Our team can help you review the 550 mm passage width, SUS304 stainless steel construction, sensor configuration, installation requirements and suitable access control options for your project.

You can also email us at sales@appliv.in for product enquiries.